Table of Contents
Advertisement
PROGRAMMING YOUR PLAYING SEQUENCE
PROGRAMMED PLAY
•
The tracks (songs) on the disc can be programmed (arranged in advance) to play in
any order you prefer (up to 21 tracks can be programmed).
Program Number
Track Number (song number)
•
During CD play, the PROGRAM button functions the same as the REPEAT button.
The set must be in stop mode (as instructed on page 5) to program it.
•
During programming, the word PGM (program) shows in the display. To program
songs to play in your preferred order, follow steps below:
1.Press the PROGRAM button once in
stop mode.
PR OG RAM
The word PGM will show in the DISPLAY.
PGM
Program number
2.Press the SKIP/SEARCH button (
) to select track number 3 (example).
PGM will flash in the displa
SKIP/SEARCH
PG M
Track number
Programming Example:
1
2
3
4
3
5
1
8
3.Press the PROGRAM button. Track 3 is
now programmed.
1
X
Program #2 will now show in the
display, ready for your next selection of
track.
4.Repeat steps 2 and 3 to program other
tracks till you finish (up to 21 selections).
5.After programming is finished, press
PLAY to begin programmed play.
or
shows in the display together with PGM,
and music begins.
y.
NOTE:
- The player will stop automatically after
all programmed tracks have been
played.
- To quit programmed play, press STOP
button once. Then you may press PLAY
button to re-start normal play.
Your programmed memory will be lost:
•
When the alkaline batteries are
exhausted or removed, or the AC
ADAPTOR is disconnected.
•
When the power is shut off.
7
etc.
6
7
5
8
etc.
4
2
1
1
1
X
PR OG RAM
PGM
Advertisement
Table of Contents
