Mp3 Playback; General Information - Durabrand CD-2086 Operating Instructions Manual

MP3 PLAYBACK

FUNCTION
switch (at the left
side of the set)
Connect the supplied AC power cord or batteries (refer to page 4).
1
FUNCTION
OFF
RADIO
CD/MP3
2
3

General Information

1. Usually, you must "write" your own MP3 disc on your computer's CD writer. Or,
you may buy pre-recorded MP3 discs from some "on line" sources.
2. When saving songs (audio files) onto your CD-R (or CD-RW), you must save
them as ".MP3" (DOT MP3) or ".WMA" (DOT WMA) files. Do not save them as
.DOC or .TXT, .PDF etc. when downloading, converting or saving files as MP3
or WMA files. Also, the files must be recorded in MP3 or WMA format.
3. Do not save TXT files as ".MP3" files because they will not play and they may
interfere with the set.
4. Do not attempt to combine normal CD audio tracks and MP3 tracks onto one CD
because the set will only recognize the audio tracks and play those, but you can
combine MP3 tracks & WMA tracks onto one CD.
IB-CD2086-WM-E-012005(WMA).pmd
Slide the FUNCTION switch to
the CD/MP3 position (power on),
the LCD display will be on, and
the word "READING " will show
in the display.
Lift the CD DOOR to open it and
push an MP3 disc down onto the
center spindle. The label side of
the disc should face upward.
Close the CD DO OR. The
display will show the total albums
and total tracks of that MP3 disc,
then the player will begin to play
automatically.
9
10
Open the disc door
by lifting here
MP3
Al b u m
T ra ck Pla yi ng
number
number ti me
IB-CD2086(AD)-WM-E-031705
3/22/2005, 5:52 PM