Zoom; Pairing And Replacing Baby Unit(S); Pairing/Replacing Baby Units - Motorola MBP421 User Manual

3.9

Zoom

You can zoom in or out while viewing an image from the baby unit.
>
1. Press to zoom in.
2. Press and hold
downward, leftward or rightward correspondingly.
<
3. Press to zoom out.

3.10 Pairing and replacing baby unit(s)

The system comes with baby unit(s) already paired with the parent unit. You can
add or replace any baby units to your baby monitor system.
You can pair a maximum of four baby units to your parent unit. Each new baby
unit must be paired to the parent unit before use.
To pair and replace a baby unit:
1. Press MENU/SELECT when the parent unit is not in use.
- +
2. Press or
< >
3. Press or
SELECT. The screen displays
NOTE
If you choose an occupied baby unit slot, the new baby unit will replace the
existing baby unit.
4. Turn on the new baby unit, and then immediately press and hold PAIR until
the POWER light turns on.
When pairing is successful, the screen displays
the newly paired baby unit.
NOTE
If pairing fails, the screen displays . Try the pairing process again. Only one
baby unit can be paired at a time.
14
+ - < >
, , or to move the zoomed image upward,
to choose .
to choose a desired baby unit slot, then press MENU/
.
, and then the image from
Using Your Baby Monitor