Changing the Flash Timing
Change the timing of the flash and shutter release as follows.
●
Press the [
Control] on the [
[Built-in flash settings].
●
Choose [Shutter Sync.], and then choose
the desired option ( = 32).
The flash fires immediately after the shutter opens.
1st curtain
The flash fires immediately before the shutter
2nd curtain
closes.
●
If the shutter speed is set to 1/100 or faster, the flash fires on [1st
curtain], even if [2nd curtain] is selected.
Changing the Flash Metering Mode
When shooting with the flash, [Evaluative] is used for a standard flash
exposure. This metering method can be changed to average flash
metering mode across the overall flash region, such as when using an
externally metered flash.
●
Press the [
Control] on the [
meter.], and then select [Average].
●
When using [Average], adjust your flash metering compensation
for the scene to be shot.
Resetting Flash Settings
Still Images
Movies
You can reset the internal flash settings to their defaults.
] button, choose [Flash
3] tab, and select
Still Images
Movies
] button, choose [Flash
3] tab, select [E-TTL II
Still Images
Movies
●
Press the [
] button, choose [Flash
Control] on the [
3] tab, and select
[Clear settings].
●
Choose [Clear built-in flash set.] and
press the [ ] button. On the next screen,
press the [ ][ ] buttons or turn the [ ]
dial to choose [OK], and then press the
[ ] button.
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
4
P Mode
5
Tv, Av, and M Mode
Tv, Av, M, and C Modes
6
Playback Mode
7
Wi-Fi Functions
8
Set-Up Menu
9
Accessories
10
Appendix
Index
77