Changing The Flash Timing - Canon PowerShot G7 X Mark II User Manual

Changing the Flash Timing

Change the timing of the flash and shutter release as follows.
1
Access the setting screen.
Press the [
z
Settings] on the [
] button ( = 30).
the [
2
Configure the setting.
Choose [Shutter Sync.], and then choose
z
the desired option ( = 30).
1st-curtain The flash fires immediately after the shutter opens.
2nd-curtain The flash fires immediately before the shutter closes.
Other Settings
Still Images Movies
Changing Image Quality
] button, choose [Flash
Choose from 7 combinations of size (number of pixels) and compression
5] tab, and then press
(image quality). Also specify whether to capture images in RAW format
( = 98). For guidelines on how many of each kind of image can fit on a
memory card, see "Number of Shots per Memory Card" ( = 220).
When deciding the number of pixels based on print size, use the following
table as a guide for images with a 3:2 aspect ratio.
Still Images
Press the [ ] button, choose [ ] in the
z
menu, and choose the desired option
( = 29).
The option you configured is now
z
displayed.
To restore the original setting, repeat this
z
process but choose [ ].
● [ ] and [ ] indicate different levels of image quality depending
on the extent of compression. At the same size (number of
pixels), [ ] offers higher image quality. Although [
have slightly lower image quality, more fit on a memory card. Note
that [ ] is image quality of [ ].
● Not available in [ ] mode.
You can also configure this setting by choosing MENU ( = 30)
●
► [ 1] tab ► [Image quality].
A2 (16.5 x 23.4 in.)
A3 (11.7 x 16.5 in.)
A4 (8.3 x 11.7 in.)
3.5 x 5 in., 5 x 7 in., Postcard
Before Use
Basic Guide
Advanced Guide
Movies
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, and C Mode
Playback Mode
Wi-Fi Functions
] images
Setting Menu
Accessories
Appendix
Index
97