Connecting The Antenna Terminals - Marantz SR4021 User Manual

CONNECTING THE ANTENNA TERMINALS

FM External
FM
Antenna Antenna
ANTENNA
AM
AUX DSS
IN IN
GND
FM (75 )
GND
AUDIO
PHONO OUT IN OUT IN IN
IN
L
R
CD RECORDER 1 RECORDER 2 AUX DSS
(CD-R) (TAPE)
ASSEMBLING THE AM LOOP ANTENNA
1.
Take out the connection line.
2.
Bend the base part in the reverse direction.
AM Loop
AM External
Antenna
Antenna
AC IN
REMOTE
VIDEO AC OUTLET
CONTROL
IN
DVD VCR MONITOR
SWITCHED
IN IN OUT OUT
150W 1A MAX.
FLASHER
IN
OUT
SYSTEM 1 : 4 - 16 OHMS
SYSTEM 2 : 4 - 16 OHMS
SYSTEM 1+2 : 8 - 16 OHMS
R L
IN IN OUT
SYSTEM 2
R L
DVD VCR PRE MAIN
OUT IN SYSTEM 1
3.
Insert the hook at the bottom of the loop part
into the slot at the base part.
4.
Place the antenna on stable surface.
CONNECTING THE SUPPLIED ANTENNAS
Connecting the supplied FM antenna
The supplied FM antenna is for indoor use only.
During use, extend the antenna and move it in various
directions until the clearest signal is received.
Fix it with push pins or similar implements in the
position that will cause the least amount of distortion.
If you experience poor reception quality, an outdoor
antenna may improve the quality.
Connecting the supplied AM loop antenna
The supplied AM loop antenna is for indoor use
only.
Set it in the direction and position it to where you
receive the clearest sound. Put it as far away as
possible from the unit, televisions, speaker cables,
and power cords.
If you experience poor reception quality, an outdoor
antenna may improve the quality.
1.
Loosen the screws and attach the wire terminals.
2.
Tighten the screws.
MODEL NO. SR4021
CONNECTING AN FM OUTDOOR ANTENNA
Notes:
• Keep the antenna away from noise sources (neon
signs, busy roads, etc.).
• Do not put the antenna close to power lines. Keep it
well away from power lines, transformers, etc.
• To avoid the risk of lightning and electrical shock,
grounding is necessary.
CONNECTING AN AM OUTDOOR ANTENNA
An outdoor antenna will be more effective if it is
stretched horizontally above a window or outside.
Notes:
• Do not remove the AM loop antenna.
• To avoid the risk of lightning and electrical shock,
grounding is necessary.
11