CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage”...
Page 3
Grounding or Polarization – This product m a y b e e q u i p p e d w i t h a p o l a r i z e d alternatingcurrent line plug (a plug having one blade wider than the other). This plug will fi...
Your Marantz product has been prepared to comply • Do not obstruct the ventilation holes. with the household power and safety requirements that exist in your area. SR4021 can be powered by 120V AC only. COPYRIGHT Recording and playback of any material may 8 ins. (0.2 m) require consent.
FEATURES ACCESSORIES ■ High quality full discrete power amplifi er Check the supplied accessories. 80W+80W (8 ohms, 20 Hz – 20 kHz, 0.08% Remote control unit (RC4021SR) THD) ■ Speaker 1/2 switching You can switch the speaker 1/2 via remote control unit.
FRONT PANEL RECEIVER SR4021 RECEIVER SR4021 MULTI JOG MULTI JOG SPEAKERS SPEAKERS DISPLAY OFF DISPLAY OFF CLEAR CLEAR MEMORY MEMORY BAND BAND AUTO TUNE AUTO TUNE BASS BASS TREBLE TREBLE BALANCE BALANCE SLEEP SLEEP DIMMER DIMMER RECORDER RECORDER PHONO PHONO...
FL DISPLAY TUNED indicator This indicator illuminates when a station is being This displays the selected station frequency or the received with suffi cient signal strength to provide corresponding words when selecting a program acceptable listening quality. source. STEREO indicator This indicator illuminates when an FM station is Shows the selected preset number.
Position the loop antenna to The marked SWITCHED provides power only when the best reception. the SR4021 is turned on and is useful for components which you use every time you play your system. VIDEO IN/OUT...
DVD player. Press the PLAY button on the remote control unit. Press to switch the power of the SR4021 ON or STANDBY. Lights up during a button is pressed and an infrared signal is sending.
USING THE REMOTE CONTROL UNIT REMOTE CONTROL OPERATIONAL RANGE The distance between the transmitter of the remote POWER ON/ POWER ON/ POWER ON/ control unit and the IR SENSOR of the SR4021 STANDBY STANDBY STANDBY should be less than about 5 meters. PREV...
Doing so may damage this unit. Note: Be sure to connect the positive and negative cables for the speaker properly. If they are miss-connected, the signal phase will be reversed and the signal quality will be corrupted. AC IN MODEL NO. SR4021 MODEL NO. SR4021...
CONNECTING AUDIO COMPONENTS Turn table CD player CD recorder Tape Deck The output audio signal from the RECORDER 1 OUT jack and the RECORDER 2 OUT jack is the same signal which is currently selected. Caution: • Do not connect this unit and other components to mains power until all connections between components have been completed.
Therefore you only need to aim the remote at one unit. Also, if a Marantz power amplifi er (some models excluded) is connected to one of these terminals, the power amplifier’s, power switch is synchronized with this unit’s power switch.
Loosen the screws and attach the wire terminals. 1.25A 150W Tighten the screws. SYSTEM 1 : MINIMUM 8 OHMS SYSTEM 2 : MINIMUM 8 OHMS SYSTEM MODEL NO. SR4021 CONNECTING AN FM OUTDOOR ANTENNA SYSTEM SPEAKER SYSTEMS Notes: • Keep the antenna away from noise sources (neon signs, busy roads, etc.).
SELECTING AN INPUT SOURCE T-MODE Before you can listen to any input media, you must fi rst select the input source on the SR4021. Example : DVD Adjust the volume to a comfortable level using the VOLUME control knob on the front panel or...
Select the input source to record by pressing the corresponding input selector button. This jack may be used to listen to the SR4021’s The input source is now selected and you may output through a pair of headphones. Be certain that watch or listen to it as desired.
RECORDER PHONO TUNER STANDBY POWER ON/OFF PHONES (Using the SR4021) To select the tuner and desired band (AM or FM), press the BAND button on the front panel. (Using the SR4021) Press the AUTO TUNE button on the front panel, and turn the MULTI JOG knob to start the Auto Tuning mode.
SLEEP band and enters all stations with proper signal STANDBY WER ON/OFF strength into the memory. 4. 3. 1. (Using the SR4021) RECEIVER SR4021 Tune into the desired radio station. (See the MULTI JOG VOLUME “MANUAL TUNING” or “AUTO TUNING”).
Page 19
This function allows the name of each preset channel using the following procedure. to be entered using alphanumeric characters. Before inputting names, you need to store preset stations with the preset memory operation. 3. 2. ER SR4021 SPEAKERS DISPLAY OFF CLEAR CLEAR MEMORY...
If your trouble cannot be recovered with the remedy actions listed in the following table, malfunction of the internal circuitry is suspected; immediately unplug the power cable and contact your dealer, nearest Marantz authorized dealer or the Marantz Service Center in your country.
AAA-size batteries ... 2 FM Antenna ... 1 AM Loop Antenna ... 1 AC Power Cord ... 1 Specifi cations subject to change without prior notice. 17-5/16 ins. (440 mm) RECEIVER SR4021 RECEIVER SR4021 MULTI JOG MULTI JOG VOLUME VOLUME SPEAKERS...
Page 22
You can find your nearest authorized distributor or dealer on our website. is a registered trademark. Printed in China 05/2006 00M13CW851250 ecmf-e...