5. Press the cover-release button on the top of the computer cover, slide the cover
Figure 5. Removing the cover
Accessing system board components and drives
You might need to remove the drive bay assembly to access system board
components such as memory, the battery, and CMOS.
To access system board components and the drives:
1. Remove the computer cover. See "Removing the cover" on page 9.
2. Remove the front bezel by releasing the three tabs and pivoting the bezel
Figure 6. Removing the bezel
10
Hardware Installation and Replacement Guide
to the rear, and remove it. If your computer has screws to secure the computer
cover, remove the screws, and then remove the cover.
outward from the top.