Pc-Doctor For Windows Pe - Lenovo ThinkCentre 6176 User Manual

1. Make sure your computer is turned off.
2. If you are running diagnostics from diskettes using a USB diskette drive, plug
3. Insert the disc into the optical drive or the first diagnostic diskette into the
4. Restart the computer.
5. When the diagnostics program opens, follow the instructions on the screen.
6. When the program finishes, remove the disc or diskette from the drive.
7. Select the diagnostic test you want to run. Press the F1 key for additional help.
Running diagnostics from the Rescue and Recovery workspace
To run diagnostics from the Rescue and Recovery workspace, use the following
procedure:
Note: If you did not create a diagnostic CD/DVD image or diagnostic diskettes,
1. Shut down the operating system and turn off the computer.
2. Repeatedly press and release the F11 key as you turn on the computer.
3. When you hear beeps or see a logo screen, stop pressing the F11 key. The
4. From the Rescue and Recovery workspace, select Launch Advanced Rescue
5. Follow the prompts on the screen. The computer will restart.
6. When the computer restarts, the diagnostic program opens automatically. Select

PC-Doctor for Windows PE

Depending upon your machine type and model, you either have PC-Doctor for
DOS or PC-Doctor for Windows PE on your Lenovo computer. The PC-Doctor for
Windows PE diagnostic program is part of the Rescue and Recovery workspace.
Use PC-Doctor for Windows PE if you are unable to start the Windows operating
system or if PC-Doctor for Windows has not been successful in isolating a possible
problem.
18
User Guide
in the USB device.
diskette drive.
Note: If the diagnostic program does not start, the optical drive or diskette
drive has not been set as a bootable device. See "Selecting a startup
device" on page 11 for instructions on how to select or change the
startup device.
Note: If you are running diagnostics from a diskette, when prompted, remove
the first diskette and insert the second diskette.
you can run the PC-Doctor for DOS diagnostic program from the Rescue
and Recovery workspace.
Rescue and Recovery workspace opens.
Note: For some models, press the Esc key to enter Rescue and Recovery.
and Recovery → Diagnose hardware.
the diagnostic test you want to run. Press the F1 key for additional help.