Acl - D-Link DSL-2730E User Manual

3.7.4

ACL

Choose Firewall > ACL, the page shown in the following figure appears. The
page that is displayed contains ACL and IPv6 ACL.
3.7.4.1 ACL
Click ACL in the left pane, the page shown in the following figure appears. In this
page, you can permit the data packets from LAN or WAN to access the router.
You can configure the IP address for Access Control List (ACL). If ACL is enabled,
only the effective IP address in the ACL can access the router.
Note:
If you select Enable in ACL capability, ensure that your host IP address is in
ACL list before it takes effect.
User Manual
74