D-Link DSL-2730E User Manual page 36

The following table describes the parameters of this page.
Field
Choose the working mode of the modem. You can
choose from drop-down list.
Band
Choose the network model of the modem, which
Mode is varied according to the software. By default, the
network model of the modem is AP.
The service set identification (SSID) is a unique
name to identify the modem in the wireless LAN.
Wireless stations associating to the modem must
SSID
have the same SSID. Enter a descriptive name
that is used when the wireless client connecting to
the modem.
Broadcast SSID Enable or disable this function.
Channel Width You can choose 20MHZ, 40MHZ or 20/40MHZ.
Control Sideband You can choose Upper or Lower.
Country/Area Select the country from the drop-down list.
A channel is the radio frequency used by
802.11b/g/n wireless devices. You should use a
different channel from an adjacent AP to reduce
Channel Number the interference. Interference and degrading
performance occurs when radio signal from
different APs overlap. Choose a channel from the
drop-down list box.
You can choose the transmission power of the
Radio Power radio signal. The default one is 100%. It is
recommended to choose the default value100%.
User Manual
Description
32