Lenovo 8010 User Manual page 47

3. Remove the front bezel by releasing the tab as shown and pivoting the bezel
outward from the bottom.
4. Lower the drive bay assembly.
5. Remove the metal shield from the diskette drive bay by using a flat-blade
screwdriver to gently pry it loose.
6. Remove the plastic panel in the bezel by squeezing the plastic tabs that secure
the panel on the inside of the bezel.
7. Reinstall the front bezel.
8. Slide the diskette drive lock to the unlock position. See "Locating
components" on page 21.
9. Connect the flat cable to the new drive.
Chapter 3. Installing options
31