Restore From Backup; Using Recovery Discs - Lenovo OneKey Rescue System 6.0 User Manual

Restore.from.Backup
If you want to recover the system to a previous status, you just
need to enter Lenovo OneKey Rescue, and select Restore from
User's Backup. Select the appropriate image file or, if you have
run incremental backup before, you can use the incremental file to
restore your system.
The process above will remove all data on the current system
partition (C partition), which is not recoverable. Please back up all
important data before restoring to a previous backup.
Using.Recovery.Discs
When you replace a hard disk drive in your computer, you are
unable to use the pre-installed Lenovo OneKey Recovery and
OneKey Rescue. However, you can use the recovery discs that
store your backed up data to restore your new hard drive to a
previous backup status.
When you use the recovery discs to boot your computer, the
system will enter system recovery user interface automatically.
Please follow the prompt to insert the backup discs in order to
complete the entire recovery process.
Lenovo OneKey Rescue System 6.0 6 6
OneKey Rescue System 6.0 V1.0 EN 147001728
2008/5/27 17:29:19
En-