Create Recovery Disc; Restore Of Factory Default - Lenovo OneKey Rescue System 6.0 User Manual

OneKey Rescue System 6.0 V1.0 EN 147001728
Create.Recovery.Disc
You can burn the backup image to a CD/DVD as recovery
discs. The recovery discs can be used to boot up your computer
automatically and restore your system back to previously backed
up status. If your hard disk fails and you are unable to use Lenovo
OneKey Recovery on your computer, you can use these discs to
recover your system on a reformatted hard drive.
1. Please make sure to create recovery discs, so that you can
recover your system, even when replacing the hard drive.
2. After the recovery discs are burned, please number them so that
you can use them in order.
3. When burning the recovery discs, please use good quality
discs with to ensure the burning process and backed up data is
complete and correct.
Restore.of.Factory.Default
In order to save application files and the initial backed up files of the
system, the hard disk in a Lenovo PC includes a hidden partition
when it is shipped. If you need to restore the system to the point of
your first boot up, just enter Lenovo OneKey Rescue System and
run Restore to Factory Default. This will delete all the new data on
the system partition (C partition), which is not recoverable. Make
sure to back up your critical data before you run this feature.
En-
Lenovo OneKey Rescue System 6.0 5 5 2008/5/27 17:29:19