Self-Diagnostic Function; Self Diagnostic Codes - Kyocera FS-2020D Service Manual

2J0/2J1/2J2
1-4-2

Self-diagnostic function

(1) Self-diagnostic function
This printer is equipped with self-diagnostic function. When a problem is detected, the printer stops printing and display an
error message on the operation panel. An error message consists of a message prompting a contact to service personnel,
total print count, and a four-digit error code indicating the type of the error. (The display varies depending on the type of
the error.)
Call service
Error code

(2) Self diagnostic codes

Code
0100 Backup memory device error
0110 Backup memory data error
0120 MAC address data error
0150 Engine PWB EEPROM error
Detecting engine PWB EEPROM com-
munication error.
0170 Billing counting error
1-4-2
6000:012345
Total print
Contents
Call service
F000
Error code
Causes
Defective flash
memory.
Defective main
PWB.
Defective flash
memory.
Defective main
PWB.
Defective flash
memory.
Defective engine
PWB.
Improper installa-
tion engine PWB
EEPROM.
Defective engine
PWB.
Defective main
PWB.
Error power off
F030
Error code
Remarks
Check procedures/corrective measures
Replace main PWB (See page 1-5-30).
Replace main PWB (See page 1-5-30).
Replace main PWB (See page 1-5-30).
Replace main PWB (See page 1-5-30).
Replace the engine PWB (See page 1-5-
25).
Replace the engine PWB (See page 1-5-
25).
Check the engine PWB EEPROM installa-
tion, Remedy.
Replace the engine PWB (See page 1-5-
25).
Replace main PWB (See page 1-5-30).