Panasonic KX-TGP600 Operating Instructions Manual page 76

Customizing the Telephone
Main Item
System Settings Register H/S
Set Time & Date
Authentication
UC Setting
Call Settings Block Anonymous
Anywhere
Block Anonymous Calls (when connected to the KX-TGP600 only)
This feature allows the unit to reject calls when the unit receives a call without phone number. The default
setting is "Off".
IMPORTANT
R We recommend setting with your administrator. Contact your administrator for further information.
R This feature is not available on shared lines.
1. /
MENU
2. [D]/[C]/[F]/[E]:
3. [D]/[C]: "Call Settings" a
4. [D]/[C]: "Block Anonymous" a
5. [D]/[C]: Select a desired line. a
6. [D]/[C]: "On"/"Off" a
Incoming Call Barring (Caller ID service users only)
This feature allows the unit to reject calls from specified phone numbers that you do not want to answer
such as junk calls.
When a call is received, the unit does not ring while the caller is being identified. If the phone number
matches an entry in the call barred list, the unit rejects the call.
Storing unwanted callers (when connected to the KX-TGP600 only)
You can store up to 20 phone numbers per line in the call barred list by using the caller list or by entering
the numbers directly.
1. /
MENU
2. [D]/[C]/[F]/[E]:
3. [D]/[C]: "Call Settings" a
4. [D]/[C]: "Block Caller ID" a
5. [D]/[C]: Select a desired line. a
6. [D]/[C]: Select a blank line. a
7. Enter the phone number (32 digits max.). a
Editing the phone numbers to reject (when connected to the KX-TGP600 only)
1. /
MENU
76
a
OK
OK
OK
OK
OK
a
OK
OK
OK
OK
OK
Sub Item
Cancel Register
Repeater Mode
Access Code
Parallel Setting
Anonymous Call
Remote Office
OK
Change Base PIN
MultilineSetting
Xsi Setting
Block Caller ID
SimultaneousRing
Page
Page
99
Page
100