Disassembly; Removing The Subscriber Identity Module (Sim) And The Micro Sd - Motorola Hawk 4.0 XT919 Assembly/Disassembly Manual

Assembly /Disassembly Manual

2 Disassembly

2.1 Removing the Subscriber Identity Module (SIM)
and the Micro SD
The procedures in this section provide instructions for the disassembly
of XT919 phones. Tools and equipment used for the phone are listed
in Table 1, preceding.
Many of the integrated devices used in this equipment are vulnerable
to damage from electrostatic discharge (ESD). Ensure adequate static
protection is in place when handling, shipping, and servicing the
internal components of this equipment.
Avoid stressing the plastic in any way to avoid damage to either the
plastic or internal components.
1.Press SIM card and SD card let it spring out from the holder, and
then slide the SIM card and SD card out of the SIM&SD holder
according to the arrow (see figure 1)
Figure 1.Removing the SIM and SD card
4