Advanced Controls (Cr-415) - Arcam DV27A Handbook

Advanced controls (CR-415)

This button brings up a menu very similar to the 'Trims' page in the
Set-up menu (as described on page 11). It allows on-the-fly changes
to the relative volume of each speaker in your system, while a disc is
Some DVDs offer the facility to select different audio
tracks. Press AUDIO to cycle through the available tracks.
The TV displays the number, language and type of audio
track, e.g.'1 Eng DD 6CH'.
Press ZOOM to enlarge a particular area of
the picture. Each press of the ZOOM
increases the zoom, normally until a maximum
of 4x enlargement is reached (although the
amount of zoom possible varies depending on
the type of disc: in some cases no zooming is
possible). Pressing when the maximum
ZOOM
enlargement has been reached returns the image
to normal size.
While using the zoom function, the cursor pad
can be used to move around within the image.
The zoom function can also be used when
playback is paused.
Note that a zoom level of x1.25 is particularly
useful if the output from the DVD player is in
a screen format different from that of your TV.
A zoom of x1.25 when a 'widescreeen' image is
displayed on a 4:3 TV causes the bars at the top
and bottom of the screen to disappear (although
the sides of the image are lost); a zoom of x1.25
when a 4:3 image is displayed on a widescreen
TV causes the bars at the side of the image to
disappear (although the top and bottom of the
image are lost).
Press P MODE
Press STATUS once to show the elapsed and remaining
time of the disc. Press
status information about the current disc. Press
The status information displayed varies depending on the
TRIM
being played.
For a full description, see page 11.
AUDIO
ZOOM
button
AUDIO
ZOOM
P
MODE
P MODE
to toggle random playback
STATUS
STATUS a second time to give play
STATUS a
third time to close the status display.
type of disc – DVD, CD or VCD.
SUBT (subtitle)
Press on the remote control to cycle through the available
SUBT
subtitle languages, including 'OFF'. Some discs force subtitles on, over-
riding player set up.
TITLE
Press to access the DVD's 'Title' menu. Note that
TITLE
this feature only applies to multi-title discs.
RTN (return)
Press
and 'Title' menus. Note that this feature is only of
use with discs using multi-level menus.
TRIM TITLE RTN
ANGLE SUBT PL
STATUS MEM SRCH
SRCH (search)
It is possible to access any point on the disc
directly using the 'Search' menu.
Press
MEM (memorise)
It is possible to 'bookmark' up to three points on
a DVD title, so you can quickly jump to those
parts of the title again. Press
'Bookmark' menu.
ANGLE
Some DVDs offer the facility to select different camera angles. If
this feature is available the 'camera' symbol lights in the display.
Press ANGLE to cycle through the available angles.
15
RTN to move back through the DVD 'Disc'
PL (Pro Logic)
This button allows the Pro Logic processing
to be changed on-the-fly (while playback is in
progress). Press the button once to see the
current processing mode (assuming that the
OSD is switched on), then again to change to
the next mode. See page 9 for a description of
each Pro Logic setting.
to access the 'Search' menu.
SRCH
MEM to access the