Nikon COOLPIX S6100 Quick Start Manual page 190

3
Tap o.
The time zone selection screen is displayed.
4
Tap E or F to choose the travel destination
time zone and tap I.
If daylight saving time is in effect, tap p to enable
daylight saving time function. W is displayed at the top
of the monitor and the camera clock is advanced one
hour. Tap p again to disable the daylight saving time
function.
While the travel destination time zone is selected, the Z icon will be displayed in the
monitor when the camera is in shooting mode.
B
Note on the Clock Battery
The camera clock is powered by the clock battery. The clock battery charges when the main battery
is inserted or an AC adapter is connected, and can provide several days of backup power after about
ten hours of charging.
C
w Home Time Zone
• To switch to the home time zone, tap w Home time zone in step 2.
• To change the home time zone, tap w Home time zone in step 2 and complete steps 3 and 4.
C
Daylight Saving Time
When daylight saving time starts or ends, turn the daylight saving time option on or off from the
time zone selection screen displayed in step 4.
D
Imprinting Date on Images
Enable date imprint from the Print date option (A 157) in the setup menu after the date and time
have been set. When the Print date option is enabled, images will be saved with shooting date
imprinted on them.
Setup Menu
Time zone
:
15/05/2011 06 30
London, Casablanca
Travel
Home time
destination
zone
Travel destination
: :
10 30 –05 00
Moscow
Nairobi
Riyadh
Kuwait
Manama
153