Precaution On Replacing The Sy-132 Board - Sony DSC-R1 Service Manual

1-2. PRECAUTION ON REPLACING THE SY-132 BOARD

VIDEO OUT Default Data Check
When you replace to the repairing board, the written data of repairing board also might be changed to original setteing because of broadcast
system (NTSC/PAL).
When the data has changed because of board replaceing etc, check the default data of VIDEO OUT if destination code is right. If not, rewrite
to the right value.
VIDEO OUT Default Data
Page Address
4F 8D
4F A2
Writing Method:
1) Select page: 00, address: 01 and set data: 01.
2) Select page: 4F, address: 8D, and set data: 00 (NTSC) or data: 01 (PAL).
3) Select page: 4F, address: A2, and set data: 00 (NTSC) or data: 01 (PAL).
4) Select page: 40, address: 38, and set data: 00.
[Save]
5) Click on the SEUS screen.
6) Select page: 80, address: 34, and check that the data is "00".
7) Select page: 80, address: 30, and check that the data is "00".
8) Select page: 00, address: 01, and set data: 00.
DSC-R1_L2
Data
NTSC PAL
00 01
00 01
1-2
Ver 1.1 2005.11