Table of Contents
Advertisement
Playing CDs
Playing CDs
Locating a Specific Track or a
Particular Point in a Track
You can quickly locate any track while playing a disc
using the =/+ (AMS: Automatic Music Sensor)
buttons. You can also locate a particular point in a
track while playing a disc.
To locate
The next or
succeeding tracks
The current or
preceding tracks
A point while
monitoring the sound
A point quickly by
observing the display
during pause
Note
If "
" appears in the display, the disc has reached the end
while you were pressing ). Press 0 (=) to go back.
8
0/) (=/+)
Press
+ repeatedly until you find the track
=repeatedly until you find the track
)(forward) or 0 (backward) and
hold down until you find the point
0/) and hold down until you
find the point. You will not hear the
sound during the operation.
Playing Tracks Repeatedly
You can play tracks repeatedly in any play mode.
REPEAT
Press REPEAT while playing a disc.
"REPEAT" appears in the display. The player repeats
the tracks as follows:
When the disc is played in
The player repeats
Continuous Play (page 6)
All the tracks
Shuffle Play (page 9)
All the tracks in random
orders
Programme Play (page 9)
The same programme
To cancel Repeat Play
Press REPEAT repeatedly until "REPEAT" disappears from
the display.
Repeating the current track
You can repeat only the current track in any play
mode.
While the track you want is being played, press
REPEAT repeatedly until "REPEAT 1" appears in the
display.
Advertisement
Table of Contents
