Download Print this page

Machine Operation; Machine Maintenance & Storage - Viper MB39CV Mamba Series Owner's Manual

Advertisement

Operation of the Canister Vacuum
* Read operators manual thoroughly
prior to operating or servicing this
machine.
DRY PICKUP
1]
Remove The vac head of machine and
confirm that there is either a cloth of
paper filter in place.
2] Replace & the latch vac head.
* Be sure the machine is not plugged
into an outlet.
3] Connect vacuum hose to inlet on the
machine body.
4] Remove tool storage lid on top of
machine and unwind power cord..
5] Choose appropriate tool, and attach it
to the free end of the hose .
6] Plug power cord into grounded
outlet.
* Do not use an extension cord in
conjunction with the standard power
cord.
7] To start the machine, push on the
red power button located above the
left rear wheel.
8] Check the filter bag periodically to see
if it is full. For optimal performance,
replace the bag when it is 3/4 full.
9] This machine is designed to be pulled
around by the vacuum hose, so pull the
hose, and the vacuum will follow.
10] To stop the machine at any time,
simply press the red power switch &
the machine will stop automatically.
MAINTENANCE
To keep the machine performing well for
many years, please follow the following
maintenance procedures.
* Always confirm that the machine is
unplugged prior to performing any
maintenance or repairs.
1] Unplug machine as soon as you are
done using it.
2] Rewind the power cord into the tool
storage area..
3] Replace the tool into the tool storage
area.
4] Check power cord for any damage. If
any damage is detected, replace the
cord immediately.
5] Lubricate wheels & casters with a
water resistant lubricant every month.
6] Check machine for loose or missing
nuts
and
bolts,
necessary.
7] Check the motor cover / filter, and
clean it after each use.
8] Remove the vacuum hose and check it
for any holes and clogs.
9] Clean the outside of the machine with
a mild cleaner.
STORAGE
1] Unplug machine from power source.
2] Properly store power cord and tools in
the on-board storage compartment.
3] Store in upright position in a dry area.
and
replace
as

Advertisement

loading