Table of Contents
Advertisement
Installing the Device Driver for Windows 2000 or Windows Me
To install the device driver in Microsoft® Windows®2000 Professional or Microsoft Windows
Millennium Edition (Me), do the following:
Note: You must download files from the Lenovo Monitor CD to use the Plug and Play feature
in Windows 2000 or Windows Me.
1. Turn off the computer and all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then the system unit. Allow your computer to start the Windows
2000 or Windows Me operating system.
4. Open the
Display Properties
and then double-clicking the
Control Panel
5. Click the
Settings
6. Click the
Advanced
7. Click the
Monitor
8. Click the
Properties
9. Click the
tab.
Driver
10. Open the
Upgrade Device Driver Wizard
and then click the Next button.
Update Driver
11. Select "Display a list of the known drivers for this device so that I can
choose a specific driver" and then click the Next button.
12. Insert the Lenovo Monitor CD into the CD drive and click the
13. Click OK.
14. Ensure that the CD drive letter is selected, and then select the "DRIVERS"
folder.
15. Select E75 CRT monitor a nd click OK. The files will be copied from
the CD to your hard disk drive.
16. Close all open windows and remove the CD.
17. Restart the computer.
The system will automatically select the maximum refresh rate and
corresponding Color Matching Profiles.
window by clicking
tab.
button.
tab.
button.
,
Start
Settings
icon.
Display
window by clicking on
19
,
button.
Have Disk
Advertisement
Table of Contents
