Rmk-1 Connection - Icom IC-F1010 Service Manual

o RMK-I connectaon
O Remove 3 allen-socket bolts from the front plate using
an allen-wrench (1/32 in).
@ Separate the front unit from the transceiver main unit.
@ At ta c h t he 'RM K- 1 r ear uni t at t achment' to the
transceiver main unit using the supplied screws.
@ Remove 4 screws from the attachment to open the
rear plate.
@ Connect one of three following optional seperation
cables to the inside of the rear plate and tighten the
cable lug using the screw. Separation
OPC-607 (3 m) ) Not permitted for European
OPC-608 (8 m) J countries
OPC-609 (1.9 m)
@ Re-attach the rear plate.
O R em ov e 4 s cr ew s f r o m t he ' RM K- 1 front uni t
attachment'to open the rear plate.
@ Connect the other end of the optional separation cable
to the atachement and tighten the cable lug using the
screw.
@ Re'attach the rear plate.
RMK-1 rear unit
attachment
Supplied screws
with the RMK-1
Separation
cable
il
,l
@ Attactr the f ront unit and
removed allen-socket bolts.
attachment with the 3
RMK-1 front unit attiachment
3 -2