Toshiba RAV-SM564UTP-E Service Manual page 92

No. Part name
Control
5
P .C. board
SVM-13010_051-106.indd 92 SVM-13010_051-106.indd 92
Procedure
1. Detachment
1) Carry out work of item 1 of
2) Remove connectors which are connected
from the control P .C. board to the other
parts and then remove wiring from the
clamp.
CN510 : Louver motor (20P , White)
CN34 : Float switch (3P , Red)
CN504 : Drain pump (2P , White)
CN101 : TC sensor (2P , Black)
CN102 : TCJ sensor (2P , Red)
CN104 : Room temp. Sensor (2P , Orange)
CN333 : Fan motor power supply
(5P , White)
CN334 : Fan motor position detection
(3P , White)
NOTE :
Unlock the lock of the housing part and then
remove the connector.
3) Unlock the locks of the card edge spacer
(6 positions) and then remove the control
P.C. board.
2. Attachment
1) Fix the control P .C. board to the card edge
spacer (6 positions)
2) Connect the connector removed in item 1
as before and then fix the wiring with the
clamp.
3) Following to work of item 2 of
the electric parts box cover and the
suction grille as before.
2 .
Card edge spacer Card edge spacer Card edge spacer
2 , mount
– 92 –
FILE NO. SVM-13010
Remarks
Clamp
2/1/13 2:49 PM 2/1/13 2:49 PM