Sharp LC-19LE320 Service Manual page 14

LC-19LE320, LC-22LE320, LC-26LE320, LC-32LE320, LC-37LE320, LC-42LE320
Fig.6
1. Remove the 5 screws and disconnect 4 cables. Detach the Main board as Fig.7 and Fig.8.
Note: Please disconnect the LVDS cable with the panel firstly, then disconnect the LVDS with the main board.
If you disconnect the LVDS cable with the Main board firstly, maybe the panel connector will be damaged because of the short LVDS cable.
Fig.7
2. Remove the 4 screws and disconnect 3 cables. Detach the Power board as Fig.9.
Note: Move the AC port left from the Main frame assy, then disconnect the AC cable from the power board.
Fig.9
Fig.8
14