Instrument Panel Brightness - Honda 2007 CR-V Owner's Manual

Main Menu
Table of Contents
Turn Signal Push down on the
lever to signal a left turn and up to
signal a right turn. To signal a lane
change, push lightly on the lever,
and hold it. The lever will return to
center when you release it or
complete a turn.
Headlights Turning the switch to
the '' '' position turns on the
parking lights, taillights, instrument
panel lights, side-marker lights, and
rear license plate light.
Turning the switch to the ''
position turns on the headlights. If
you leave the lights on with the key
removed from the ignition switch,
you will hear a reminder chime when
you open the driver's door.
Turn Signal and Headlights, Instrument Panel Brightness
High Beams
forward and the high beam indicator
will come on (see page
back to return to low beams.
To flash the high beams, pull the
lever back lightly, then release it.
The high beams will stay on as long
as you hold the lever back.
Daytime Running Lights
With the headlight switch in the off
or position, the high beam
headlights and the high beam
''
indicator come on with reduced
brightness when you turn the
ignition switch to the ON (II)
position and release the parking
brake. They remain on until you turn
the ignition switch off, even if you
set the parking brake.
The headlights revert to normal
operation when you turn them on
with the switch.
Push the lever

Instrument Panel Brightness

63 ). Pull it
You can change the instrument panel
brightness only when the light
switch is on.
Turn the knob on the lower part of
the instrument panel to adjust the
brightness.
You will hear a beep when maximum
or minimum brightness is reached.
INSTRUMENT PANEL BRIGHTNESS
CONTROL KNOB
CONTINUED
75