Main Menu
Table of Contents
Setting the Clock
On models without navigation system
To set the time, press the CLOCK
button until you hear a beep. The
displayed time begins to blink.
Change the hours by pressing the H
(hour) button until the numbers
advance to the desired time. Change
the minutes by pressing the M
(minute) button until the numbers
advance to the desired time.
Press the CLOCK button again to
enter the set time.
You can quickly set the time to the
nearest hour. If the displayed time is
before the half hour, pressing and
holding the CLOCK button, then
pressing the R button sets the clock
back to the previous hour. If the
displayed time is after the half hour,
the clock sets forward to the
beginning of the next hour.
206
LX model
CLOCK BUTTON
(A.SEL side of the A.SEL/SCAN bar)
HOUR BUTTON
(PRESET 4)
MINUTE BUTTON
(PRESET 5)
For example:
1:06 will reset to 1:00
1:52 will reset to 2:00
EX and EX-L models without
navigation system
CLOCK BUTTON (AM)
RESET BUTTON
(PRESET 6)
HOUR BUTTON
(PRESET 1)
On models with navigation system
The navigation system receives
signals from the global positioning
system (GPS), and the displayed
time is updated automatically by the
GPS. Refer to the navigation system
manual for how to adjust the time.
RESET BUTTON
(PRESET 3)
MINUTE BUTTON
(PRESET 2)