Reset Device; Set All Devices' Network Name - TP-Link TL-PA411 User Manual

If you want to upgrade the version of firmware for the device, please select appropriate Firmware and
PIB files together. New firmware versions and PIB files are posted at
downloaded for free.

Note:
The parameter information of PIB will restore to the factory defaults after resetting the PLC.
To upgrade the device's firmware, follow these instructions:
1. Download PIB file and firmware upgrade file from the TP-LINK website
2. Enter the path name or click
corresponding blanks.
3. Click the OK button.

Note:
Do not turn off the device while the firmware is being upgraded. The device will reboot after the
Upgrading has been finished.

4.4.2 Reset Device

This Management Utility allows you to reset the Powerline Adapter to its default settings.
Reset Local Device: Click this button to reset the settings of the local Powerline Adapter device

only.
Reset All Devices: Click this button to reset the settings of all devices that appear on the

Network configuration homepage whose Device Password had been entered for the same
logical network.

4.4.3 Set All Devices' Network Name

The Set All Devices' Network Name function allows you to change the logical network of all devices
that appear on the Network configuration homepage whose Device Password had been entered for the
same logical network. A dialog window will appear to report the success of this operation.
All Powerline devices are shipped using a default logical network (network name), which is normally
"HomePlugAV".
To set all devices' network name, please type the name in the field and click the Set Network Name
button to apply the setting.

Note:
Every Powerline Adapter on your home network MUST have the same Network Password for
connectivity to be established throughout your home.
TL-PA411
to select the downloaded files on the computer into the
20
AV500 Powerline Adapter
www.tp-link.com and can be
(
www.tp-link.com).