International And Us Channels - Simrad Shipmate RS8400 Introduction Manual

International and US channels may be used with this unit, permitting operation
in all waters.
US
10
E 1
WX
1
P 1
TX OFF
10
To toggle between US system and International
channels, press the E key and 1 key. If the legend
ERROR is displayed, it indicates that US chan-
nels are not available.
US channels 13 & 67 are preset to 1W output.
This is shown by a flashing 1W on the display.
For 25W output, press and hold the PTT key and
then press the ON key. When using these channels
the handset OFF function will be inoperative.
US FUNCTION:
To select the Weather Channels.
In the International version, key WX is
exchanged with key P.
E
Refer to page 14 for details on the Private Chan-
nels.
US FUNCTION:
Transmitting continuously for more than 5 min-
utes, will cause the transmission to turn off.
To resume transmission, release the PTT key and
then press it again.
15