Fujitsu SRS-12i User Manual page 23

To program a number that includes pauses and special codes, use the
keypad to enter the digits and the HOLD button to enter pauses, which
appear on the display as commas. The example shows a standard
telephone number followed by a voice mail access code and a voice mail
password.
Note:
If a number is entered with more than 16 digits, the 17th and subsequent
3
digits appear in the 16th number position, and previously entered digits
are shifted one column to the left. (The digit in the first number position
disappears from the display, but is still recorded.) If you try to exceed the
30-digit limit, the set refuses the input and the display remains unchanged.
4. Press ENTER
The associated LED turns green, and the word COMPLETED appears,
remaining for 15 seconds.
5. Press OPTIONS to return to the normal display. Or to program or change
another One-Touch number, press a multifunction button, then repeat
steps 2, 3 and 4 or to return to the main menu, press asterisk (*).
Including Codes in a One-Touch Number
Both telephone numbers and one or more special codes can be recorded on
a single One-Touch button with appropriate pauses between numbers to
allow for system response. Up to 30 digits, with each pause character counting
as one digit is allowed.
In the example, the digital set sends the voice mail access code, pauses for
two seconds while the system switches to voice mail, and then sends the
caller' s voice mail password.
calling number
3-4
ENTER DIRECTORY NUMBER
DN=8247629,99,,2502
DN=912229876543
COMPLETED
8 2 4 7 6 2 9 , 9 9 , , 2 5 0 2
1 second pause
(15)
(16)
voice mail access
voice mail password
2 second pause