Dodge 2013 VIPER SRT User Manual page 48

E LE C TR O NICS
Complete the pairing procedure
• When prompted on the phone, enter the 4-digit PIN number shown on the Uconnect
Screen.
• If your phone asks you to accept a connection request from Uconnect, select "Yes". If
available, check the box telling it not to ask again – that way your phone will
automatically connect each time you start the vehicle.
Select the mobile phone's priority level
• When the pairing process has successfully completed, the system will prompt you to
choose whether or not this is your favorite phone. Selecting Yes will make this phone the
highest priority. This phone will take precedence over other paired phones within range.
Only one phone can be paired at a time.
• You are now ready to make hands-free calls. Press the Uconnect
steering wheel to begin.
Making A Phone Call
• Press the Uconnect
• After the BEEP, say "dial" then the number (or "call" then the name as listed in your
phone; see Phonebook).
NOTE:
You can also initiate a call by using the touch-screen on the Phone main screen.
Receiving A Call – Accept (And End)
• When an incoming call rings/is announced on Uconnect
button .
• To end a call, press the Phone button
Mute (Or Unmute) Microphone During Call
• During a call, touch the mute soft-key on the Phone main screen to mute and unmute
the call.
Transfer Ongoing Call Between Handset And Vehicle
• During a call, touch the Transfer soft-key on the Phone main screen to transfer an
on-going call between handset and vehicle.
Common Phone Commands (Examples)
• "Call John Smith"
• "Call John Smith mobile"
• "Dial 1 248 555 1212
• "Call Emergency"
• "Call Towing Assistance"
• "Redial"
46
Phone button
®
.
.
® Phone button on your
® , press the Phone
®