Lennox Hearth Products EDVI30 Care And Operation Instructions Manual page 10

1. Place the rear log onto the two corresponding locating pins at the
back of the firebox as shown in Figure 22.
Rear Log
Figure 22
. Place the Front Right Log onto the two corresponding locating pins
as shown in Figure 23.
Figure 23
3. Place the Center Log onto the two corresponding locating pins
as shown in Figure 24.
Figure 24 Center Log
4. Place the Front Left Log onto the two corresponding locating pins
as shown in Figure 25.
10
Front Right Log
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE
Figure 25
Front Left Log
5. Install the Top Left Log onto the corresponding locating pin and
indentation on Center Log as shown in Figure 26.
Figure 26
Top Left Log
6. Install the Front Center Log over the Front Right Log . The front
of log will rest on the burner and the back of log will rest on rear log
as shown in Figure 27.
Figure 27
7. Install the Top Right Log into the corresponding indentations on
Front Center Log and Locating Pin as shown in Figure 28.
Front Center Log