DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual
Creating WAN Connection
PPPoE or PPPoA Connection
In the Connection name field, specify a name for the connection for easier identification.
For ADSL WAN connection, fill in the VPI and VCI fields.
In the Username field, enter your login, and in the Password and Password confirmation
fields – the password provided by your ISP.
As a rule, the specified settings are enough to configure a connection of the selected type. If you
need to specify additional settings, open the expert settings mode. To do this, use the switch in the
bottom left corner of the page. After switching to the expert settings mode, the following sections
are displayed: ATM (for ADSL WAN connection), Ethernet (for Ethernet WAN connection), PPP,
Miscellaneous, and VLAN.
Figure 29. Configuring PPPoE WAN connection.
Page 41 of 182
Configuring via Web-based Interface