Appendix; Specifi Cations; Troubleshooting - Sharp Aquos LC-32M400M Operation Manual

Appendix

Troubleshooting

The problems described below are not always caused by malfunctions. Check the TV again before having the
TV serviced.
Problem
• No power. • Check if you pressed POWER on the remote control unit. (See page 6.)
If the indicator on the TV lights up red, press POWER.
• Is the AC cord disconnected?
• Has the power been turned on? (See page 6.)
• Unit cannot be operated. • External infl uences such as lightning, static electricity, etc., may cause improper
operation. In this case, operate the unit after fi rst turning the power off the TV or
unplugging the AC cord and re-plugging it in after 1 or 2 minutes.
• Is battery inserted with polarity (e, f) aligned? (See page 5.)
• Remote control unit does not
operate.
• Is battery worn out? (Replace with new battery.)
• Are you using it under strong or fl uorescent lighting?
• Is a fl uorescent light shining on the remote control sensor?
• Picture is cut off. • Is the image position correct? (See page 10.)
• Are screen mode adjustments such as picture size made correctly? (See pages 10 to
13.)
• Strange color, light color, or • Adjust the picture tone. (See page 9.)
dark, or color misalignment. • Is the room too bright? The picture may look dark in a room that is too bright.
• Check the color system setting. (See page 12.)
• Check the input signal setting. (See page 12.)
• Check the HDMI auto view setting. (See page 11.)
• Power is suddenly turned off. • The unit's internal temperature has increased.
Remove any objects blocking the vent or clean.
• Check the ECO setting. (See pages 9, 10.)
• Is the sleep timer set? (See page 5.)
• No picture. • Is the connection to external equipment correct? (See page 4.)
• Has the input signal setup been performed correctly after connection? (See page 12.)
• Is the picture adjustment correct? (See page 9.)
• Is the antenna connected properly? (See page 3.)
• Is "On" selected in "Audio Only"? (See page 12.)
• No sound. • Is the volume too low? (See page 5.)
• The TV sometimes makes a • This is not a malfunction. This happens when the cabinet slightly expands and
cracking sound. contracts according to changes in temperature. This does not affect the TV's
performance.
Cautions regarding use in high and low temperature environments
• When the unit is used in a low temperature space (e.g. room, offi ce), the picture may leave trails or appear slightly
delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.
• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near
a heater, as this may cause the cabinet to deform and the LCD panel to malfunction.
Storage temperature: f20°C to e60°C.
Clearing the password
1
Repeat steps 1 to 2 in Setting a password. (See page 10.)
2
The password input screen displays.
3
If you enter "3001" using 0 – 9, the "Child Lock" setting menu will be displayed.
4
Enter the 4-digit number as a password using 0 – 9. The new password is now set.
Possible Solution
Specifi cations
Model
Item
LCD panel
Resolution
Video Color System
TV TV-Standard
Function
Receiving VHF/UHF
Channel
CATV
TV-Tuning System
STEREO/BILINGUAL
Viewing angles
Audio amplifi er/Speakers
Terminals Antenna input
INPUT 1
INPUT 2/INPUT 3
INPUT 4
INPUT 5
INPUT 6
INPUT 7 (PC input)
AUDIO OUT
RS-232C
USB device/File system
Photo fi le format
Music fi le format
(Files may not be playable
depending on the bitrate.)
OSD language
Power Requirement
Power Consumption
without stand
Dimensions
with stand
Weight
Operating Temperature
• As a part of policy of continuous improvement, SHARP reserves the right to make design and specifi cation changes for
product improvement without prior notice. The performance specifi cation fi gures indicated are nominal values of production
units. There may be some deviations from these values in individual units.
Optional accessory
The listed optional accessory is available for the LCD color TV.
Please purchase it at your nearest shop.
• Additional optional accessories may be available in the near future.
When purchasing, please read the newest catalog for compatibility
and check the availability.
15 16
LC-32M400M
31.5o (800 mm) Advanced Super View & BLACK TFT LCD
1,049,088 pixels (1366 g 768)
PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60
NTSC: M
44.25—863.25 MHz
S1—S41ch (including Hyperband)
Auto Preset 99 ch
MTS: M
H : 176º V : 176º
5 W g 2 / 5 g 9 cm 2pcs
UHF/VHF 75 q DIN type
HDMI (HDMI input), AUDIO in ( 3.5 mm jack)
HDMI (HDMI input) / HDMI (HDMI input)
S-VIDEO in, VIDEO in, AUDIO in
VIDEO in, AUDIO in
AUDIO in, COMPONENT in
15 pin mini D-sub, AUDIO in (common use with INPUT 1) (
AUDIO out
9 pin D-sub male connector
USB Memory / FAT/FAT32
JPEG (.jpg) (DCF2.0 compliant). Progressive format jpeg fi les are not supported.
MP3 (.mp3) Bitrate: 32 k, 40 k, 48 k, 56 k, 64 k, 80 k, 96 k, 112 k, 128 k, 160 k,
192 k, 224 k, 256 k, 320 kbps
Sampling frequency: 32 k, 44.1 k, 48 kHz
English/Simplified Chinese/Arabic/French/Portuguese/Russian/Persian/Thai/
Vietnamese/Indonesian
AC 110—240 V, 50/60 Hz
102 W (0.8 W Standby)
792 (W) g 540 (H) g 113 (D) mm
792 (W) g 576 (H) g 242 (D) mm
8.5 kg (without stand) / 9.2 kg (with stand)
0°C — 40°C
Part name
Wall mount bracket AN-37AG2+AN-37P30
3.5 mm jack)
Model number