Automatic Draining Time Adjustment - Daewoo DWF-750 Service Manual

Automatic Drainning time Adjustment
This system adjusts the draining time automatically according to the draining condition.
Draining
condition
FUNCTIONAL PRINCIPLE
1 The micom can remember the time from the begining of drain to reset point when the pressure switch reaches to
"OFF" point
Drain Time
Less than
10 minutes
More than
10 minutes
2 In case of continuous draining, residual drain time is determined by micom.
Draining time as a whole = D + 40
12 EXPLANATION
Good draining
Bad draining
No draining
Movement of the Program
Continue draining
Program stops and gives the alarm with
Residual drain time.
The time remembered by micom.
The washer begins spin process after drainage.
Draininig time is prolonged.
Program is stopped and gives the alarm.
blinked on display lamp.