Controls And Displays; Front Panel - Pioneer VSX-524-K Operating Instructions Manual

01

Controls and displays

01
Controls and displays

Front panel

1 2
10 11 12
1 INPUT SELECTOR dial
Selects an input source (page 22).
2
MCACC indicator
Lights when Acoustic Calibration EQ (page 29) is on
(Acoustic Calibration EQ is automatically set to on after the
Auto MCACC setup (page 19)).
3
Receiver control buttons
SPEAKERS – Use to change the speaker system on or off.
When the SP OFF is selected, no sound is output from the
speakers connected to this receiver.
DIMMER – Dims or brightens the display. The brightness
can be controlled in four steps.
DISPLAY – Switches the display of this unit. The listening
mode, sound volume, input name can be checked by
selecting an input source.
4
Character display
See Display on page 7.
6
En
3 4 5 6
13 14 15
5
Tuner control buttons
BAND – Switches between AM, FM ST (stereo) and FM
MONO radio bands (page 26).
TUNER EDIT – Use with TUNE
ENTER to memorize and name stations for recall
(page 26).
TUNE
PRESET
(page 26).
6
HDMI indicator
Blinks when connecting an HDMI-equipped component;
lights when the component is connected (page 14).
7
iPod iPhone indicator
Lights when an iPod/iPhone is connected and iPod/USB
input is selected (page 24).
8
Remote sensor
Receives the signals from the remote control (see Operating
range of remote control on page 9).
7 8 9
23
16
, PRESET
– Used to find radio frequencies (page 26).
– Use to select preset radio stations
17 18 19
24 25
9 MASTER VOLUME dial
STANDBY/ON
10
11
PHONES jack
and
Use to connect headphones. When the headphones are
connected, there is no sound output from the speakers. The
listening mode when the sound is heard from the headphone
can be selected only from PHONES SURR, STEREO or
STEREO ALC mode.
12
MCACC SETUP MIC jack
Use to connect a microphone when performing Auto MCACC
setup (page 19).
13
Listening mode buttons
AUTO SURROUND/STREAM DIRECT – Switches
between Auto surround mode (page 28) and Stream
Direct playback (page 29).
ALC/STANDARD SURR – Press for standard decoding
and to switch between the modes of
NEO:6, and the Auto level control stereo mode (page 28).
20 21 19 22
26 27 27 28
Pro Logic and