B. Rear Wheel - Honda C72 Shop Manual

10. CONSTRUCTION OF WHEEL
A. Front wh ee l
cast 'lng of whole width hub containing ball bearings
Front wheel body made of aluminium
and brake drum inside is fitted with brake panel and speed meter unit by wheel axis and
nuts. To assemble the front wheel to the chassis, fit on the lower end of front fork
fi
React ion occured during braking can be caught by the
slide pipe by the axle Itting.
left side bearing through the stopper of the brake panel.
Fig. 10 - 1. Cross section of front hub
128
B. Rear wheel
The rear wheel of Model C72, 77 is consisted of wheel bearing, rear wheel hub of
almin ium equipped with the brake drum, the final drive nange serving chain case partially
and brake panel. On the left side, the brake panel is equipped through the distance
collar, and between the wheel hub and the final drive nange there is fitted rear wheel
damper.
On the right side of the wheel hub containing ball bearing, the chain case is equipped
through the final drive nange fitted with the rear wheel damper and the final driven
sprocket, and is tighten on the rear axle passing through the left side of the rear fork
through the distance collar on th e left side.
The rear wheel damper absorb not only abrupt variation of rotation during braking and
driving force of the rear wheel hub, but also is useful to protect transmission mechanism.
Th e rear wheel of Model CB72, 77 is consisted of ball bearing 163041, the rear wheel
hub of alminium casting equipped with the brake drum and the brake panel.
On the left side there equipped the rear brake panel of twin cam type through the panel
side collar and on the right side of th e wheel hub, hub and the nnal driven sprocket
are fixed by the sprocket setting bolt. and nxed on the rear fork by the rear axle through
the rear side collar.
Fi g.
10-2.
To
draw aut the rear whee l from the frame (Model
CB72, 771
129