Dynamic Ip (Dhcp) - D-Link DIR-860L User Manual

Wireless ac1200 dual band gigabit router
Hide thumbs Also See for DIR-860L:
Table of Contents

Advertisement

Section 3 - Configuration
If you are unsure what method you use to connect to the Internet, try this first. Cable modems usually use this type of connection
My Internet
Select Dynamic.IP.(DHCP) to obtain IP Address information automatically
Connection:
from your ISP. Select this option if your ISP does not give you any IP
numbers to use. This option is commonly used for cable modem services.
Enable Advanced
Advanced Domain Name System (DNS) enhances your Internet performance
DNS Service:
by getting you the information and web pages you are looking for faster
and more reliably. In addition, it improves your overall Internet experience
by correcting many common typing mistakes automatically, taking you
where you intended to go and saving you valuable time.
Disclaimer: D-Link makes no guarantee as to the availability, reliability,
functionality and operation of the Advanced DNS service or its features.
Enable True
Check to enable true Gigabit routing. This will increase the throughput
Gigabit Routing
of the WAN-LAN connectivity of the router.
Connectivity:
Host Name:
The Host Name is optional but may be required by some ISPs. Leave
blank if you are not sure.
Use Unicasting:
Check the box if you are having problems obtaining an IP address from
your ISP.
Primary/Secondary
Enter the Primary and Secondary DNS server IP addresses assigned by your ISP. These addresses are usually obtained automatically
DNS Server:
from your ISP. Leave at 0.0.0.0 if you did not specifically receive these from your ISP.
MTU:
Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1500 is the default
MTU.
MAC Address:
The default MAC Address is set to the Internet port's physical interface MAC address on the Broadband Router. It is not recommended
that you change the default MAC address unless required by your ISP. You can use the Clone.Your.PC's.MAC.Address button to
replace the Internet port's MAC address with the MAC address of your Ethernet card.
D-Link DIR-860L User Manual

Dynamic IP (DHCP)

27

Advertisement

Table of Contents
loading

Table of Contents