Circuit Board Layout And Wiring; Rear/Top View; Power Switch And Ac Connector Wiring; Cable Colors - Yamaha MG10/2 Service Manual

CIRCUIT BOARD LAYOUT & WIRING
Rear view
Top view

Power switch and AC connector wiring

(V975620) (Connector assembly 2P BROWN, RED)
V9737300 (MAIN circuit board) V998150
(Connector assembly 3P
BROWN, RED, BLACK)
Shrink Tube
WB071100 (Shrink tube: Seven places)
Need twist of one rotation.

Cable Colors

RED
BLACK
Cable Tie
VV104600 (Cable Tie)
MAIN
RED
BROWN
Bundle the four cables connected to power switch
by the cable tie and pull to left side.
Right side view
Wiring to MAIN circuit board
Need twist of
one rotation.
RED
BROWN
(V998150) is soldering on solder side.
When soldering a wire, it fixed in the state
that inclined to the left about 45 degrees,
and it wires so that it may not be from white
slash area of circuit board.
MG10/2
11