Commissioning; Switching The Machine On/Off - Pfaff 571 Instruction Manual

Installation and commissioning
8

Commissioning

.07
● Check the machine, particularly the electrical wiring, for any damage.
● Clean the machine thoroughly and then oil it or fill in oil (see Chapter 10 Care and
● Have a mechanic check whether the motor of the machine can be operated with the
● When the machine is running, the balance wheel must turn towards the operator. If it does
● Machines with pneumatic equipment must be connected to the compressed air supply.
8

Switching the machine on/off

.08
● Switch the machine on or off (see Chapter 7.01 On/off switch).
8 - 10
maintenance).
available power supply, and that the motor is correctly connected in the junction box. If
there are any discrepancies the machine must not be operated under any
circumstances.
The machine may only be connected to an earthed socket!
not, have the motor connection changed by a mechanic.
The pressure gauge should indicate a pressure of 6 bar. If necessary, adjust to the correct
setting (see Chapter 10.05 Checking adjusting the air pressure).