Dimplex DF2000L Owner's Manual page 8

Fireplace Installation
Mantel Installation
Figure 2
For use with a new or existing
mantel. Depending on the avail-
able space within the mantel cav-
ity, the unit can be secured to the
mantel at the bottom side or back.
Remove the screw on the bottom
flange in the most appropriate
place for securing and using the
provided L-bracket and the screw
that was removed attach the fire-
Figure 3
box to the mantel. (Figure 2)
!
NOTE: There are no guide
holes provided for the L-Brackets
21 ⅝ in.
in the mantel.
(550 mm)
If not installing the unit into a Dim-
plex mantel the required opening
dimensions of the fireplace are:
21 ¼ in. (540 mm) wide x 21 ⅝ in.
(550 mm) high x 7 ¼ in. (184 mm)
21 ¼ in.
deep (Figure 3).
(540 mm)
The firebox is to be installed
7 ¼ in.
from the front of the mantel and
(184 mm)
inserted so that the flanges are
flush against the front surface of
the mantel.
8 www.dimplex.com