Product Information - Philips CED2000 User Manual

» With the registration, you can get
information about software update and
product support at this Web page or
via your mailbox that is registered as
the account for Club Philips.
Perform the upgrade
1
Check the current firmware version of this
system (see 'View system information' on
page 41).
2
Go to www.philips.com/support.
3
Login with your account for Club Philips.
» Support information about your
registered product is displayed.
4
Click the link of "Firmware Upgrade
Readme File" (the exact wording of this
link name may vary in different languages).
5
Read and understand the instructions on
firmware upgrade.
6
Follow the instructions to download the
upgrade packet and complete the upgrade.
• If the upgrade fails, reboot this system,
and then perform the upgrade again.
40 EN
15 Product
information
Note
•
Product information is subject to change without prior
notice.
General
Power supply
Fuse
Suitable speaker
impedance
Maximum power
output
Continuous power
output
Pre-Amp output
voltage
Sub-woofer output
voltage
Aux-in level
Dimensions (W x
H x D)
Weight (main unit)
Disc player
System
Disc diameter
Frequency response
Signal/noise ratio
Total harmonic distortion
Channel separation
Video signal format
Video output
12 V DC (11 V - 16 V),
negative ground
15 A
4 - 8
50 W x 4
22 W x 4 channels (4
10% T.H.D.)
2.5 V (CD play mode; 1
kHz, 0 dB, 10 k load)
2.5 V (CD play mode, 61
Hz, 0 dB, 10 k load)
800 mV
178 x 101.5 x 160 mm
3.1 kg
DVD / CD audio /
MP3 system
12 cm
20 Hz - 20 kHz
> 75 dB
Less than 0.3%
> 55 dB
NTSC/PAL
1 +/- 0.2 V p-p