Reset The System; Replace The Fuse; Upgrade The Firmware - Philips CED2000 User Manual

5
Repeat steps 3 and 4 to assign more
functions to buttons on the steering wheel.
To clear the assignment, tap [Clear All].
•

Reset the system

If the system hangs up, reset it.
1
Flip up the protective cover.
2
Press RESET with the tip of a ball-point
pen or toothpick.

Replace the fuse

If there is no power, check the fuse and replace
it if it is damaged.
1
Detach the main unit from dashboard.
2
Check the electric connection.
3
Remove the damaged fuse from the rear
panel.
4
Insert a new fuse with the same
specifications (15 A).
Tip
•
If the fuse gets damaged immediately after it is
replaced, an internal malfunction may occur. In this case,
consult your Philips retailer.

Upgrade the firmware

Note
•
Power supply must not be interrupted during the
upgrade.
•
When the firmware upgrade succeeds, all settings are
restored to the factory default status.
Register your product
1
Go to www.philips.com/welcome.
2
Click the link of "Register my product"
(the exact wording of this link name may
vary in different languages).
3
Log in with your account on the prompt
Web page.
• If you have no account for Club Philips,
create one first on this Web page.
4
Search your product with "CED2000/98"
as the keyword.
5
Click the link of search result to access the
Web page for registering your product.
6
Fill in necessary information about this
product to complete the registration.
EN 39