Listening To The Sound In Another Zone (Zone 2 Operations) - Sony STR-DA3300ES Operating Instructions Manual

Notes
• Sound adjustments do not affect the signal output
from the MDrrAPE OUT jacks.
• The audio input signals from the MULTI
CHANNEL INPUT jacks are not output.
To record digital sound
Connect a component for playback to the
digital audio input (OPTICAL IN) jack, and
connect the recording component to the
OPTICAL MDITAPE OUT jack.
1
Press the input button of the
playback component.
2
Prepare the component for
playing.
For example, insert the video tape you
want to copy into the VCR.
3
Prepare the recording
component.
Insert a blank video tape, etc., into the
recording component (VIDEO 1 or
VIDEO 2) for recording.
4
Start recording on the
recording component, then
start playback on the playback
component.
Notes
• Some sources contain copy guards to prevent
recording. In this case, you may not be able to
record from the sources.
• The audio input signals from the MULTI
CHANNEL INPUT jacks are not output.
Listening to the sound in
another zone
(ZONE 2
operations)
You can enjoy images and sounds from a
component connected to the receiver in a zone
(zone 2) other than the main zone. For
example, you can watch the DVD in the main
zone and listen to the CD in zone 2.
When using an IR repeater (not supplied), you
can also operate both a component in the main
zone and Sony receiver in zone 2 from zone 2.
• Switching the output source for the ZONE 2
OUT jacks.
• Switching the Sony receiver's power on or
off in zone 2.
Before using the zone 2
function
It is necessary to perform connection and
menu settings.
For details on the settings, refer to the
following illustration or "2: Connecting
speakers" (page 17).
Set "Sur Back Assign" to "ZONE 2" in the
Speaker settings menu.
..
o ....
::::T
(I)
...
conunued----------
101
GB