FujiFilm FinePix A310 EG Service Manual page 57

FinePix A310 Service Manual
---> The [Product Mode Setting Screen (Fig.36)] is appears.
<Step 6>
Press the [Enter] key while in the [Product Mode Setting Screen (Fig.36)].
---> When the settings are completed normally they are saved to the flash ROM,
and the [FinePix A310 Adjustment finished Screen (Fig.37)] is appears.
<Step 8>
1. Remove jig and all cables from the camera.
2. Press the [Enter] key on the PC.
---> The display returns to the [Inithal Screen (Fig.2)] after pressing the [Enter] key.
4. Adjustments
Fig.36
Fig.37
57