NOTE
Note on setting the clock
•
If the indoor unit's internal clock is not set to the correct time, the ON TIMER, OFF TIMER and WEEKLY TIMER will not operate punctually.
01_EN_3P255639-2A.indd 10
Turn the breaker on
•
After the power is turned on, the flaps of the indoor unit open and close once to set
the reference position.
To set the clock
1.
Press
.
• "
• "
2.
Press
to set the current day of the week.
3.
Press
.
• "
4.
Press
to set the clock to the present time.
•
Holding down
or
rapidly increases or decreases the time display.
5.
Press
.
•
Point the remote controller at the indoor unit when pressing the buttons.
" is displayed on the LCD.
" and "
" blink.
" blinks.
• " " blinks.
10
2/16/2011 2:43:11 PM