Cleaning Surface/Steam Setting Reference; Hard Floor Cleaning; Attaching An Accessory - Oreck STEAM-IT STEAM100LRH User Manual

Operation
E N

Cleaning Surface/Steam Setting Reference

Cleaning
Surfaces
Glass & Mirrors
Grout on Hard
Surfaces
Tiled Surfaces,
Cabinets &
Countertops in
Kitchens &
Bathrooms
Sealed Hardwood

Hard Floor Cleaning

Reduce the steam flow to a lower setting by turning the steam control
regulator. Use both forward and backward strokes across the floor area.
NOTE: When the cloth becomes very wet, let cool, ring out the
moisture, use the reverse side or replace with a clean, dry cloth.
To Sanatize Hard Floor Surfaces:
• Allow unit to heat for one minute.
• Set steam regulator to "HIGH".
• Use short scrubbing motions on hard floor area for at least 5 seconds.

Attaching an Accessory

Accessories can be used on the main body of the steam cleaner by
removing the powerhead and then attaching the desired accessory.
1. Press the lock button to remove the powerhead when cool.
2. Attach the desired accessory by aligning the hole in the side of the
accessory with the lock button on the main body of the steam cleaner.
Ensure the lock button clicks firmly into place.
G L I S H
Steam
Regulator Setting
Minimum (Low)
Medium to High
Low to Medium
Low
7