Advertisement
I . Y o u r W a l k e r & I t s P a r t s
2
1
11
8
9
7
5
6
All Models
1. Handle and grip
2. Brake cable
3. Cargo basket
4. 8" wheel
5. Crossbrace
6. Front fork assembly
8. Adjustment knob
9. Seat
11. Brake lever
12. Folding handle
000-5448 Rev. G
10
2
12
3
4
Pro 402 Model Only
7. Slow down brake assembly
and tension adjustment knob
10. Padded backrest
I I . A s s e m b l y & A d j u s t m e n t
RISK OF INJURY–
Do not use your Pro 400 Series Rolling Walker
•
until the handles are properly adjusted and the
adjustment knob is securely in place.
Do not exceed the maximum user weight of
•
159 kg or 350 lbs.
A. HANDLE ADJUSTMENT
1. To Install handles:
a. Loosen the adjusting knob by turning
counterclockwise.
b. Insert the right handle.
c. Stand inside the walker and move the handle up
or down until it is in line with the bend in your
right wrist.
NOTE– When you are using your walker your elbow
should be bent approximately 20°- 30°.
RISK OF INJURY– Do not extend the handle beyond
the red mark on the handle's tube; doing so may
result in a loss of support and handle failure.
d. Secure the handle adjustment. Turn the knob
clockwise and tighten securely making sure not
to allow the handle to move up or down.
e. Repeat steps 1b - 1d above for your left arm.
2. To adjust handles:
a. Loosen the adjusting knob by turning
counterclockwise.
b. Repeat Steps 1c and 1d above, for both your
right and left arms.
3
000-5448 Rev. G
Advertisement
