VFR 20 - VFR 70
4 Assembly
4.1 Disassembling, installing and assembling the
device
Fig. 6: Remove the storage heater from its packaging. Dis-
pose of the packaging material properly.
Fig. 7: Attach the two side wall brackets to the rear side of the
equipment. Attach the upper wall bracket to the two side wall
brackets
EN-22
Fig. 8: Remove the screws from both side panels (A). Slide
the side panels downwards (1) and swing them out (2). After
the side panels have been removed, unscrew the fixing
screws (B) on the front grille and remove the front grille. Then
unscrew the fixing screws (C) for the front panel.
Fig. 9: Pull the front panel forwards while lifting it gently to re-
move it from its rear attachment.
459562.66.01 · 06/14/A
www.dimplex.de